To complete the model 56- 57th size, 100 g of yarn (thick twisted thread) will be required: 80 g of brown and 20 g of pink. Knitting needles number 4, hook number 3.5. Knit the base of the cap with a brown thread, knitting from the bottom up. Draw on the knitting needles the number of loops equal to the volume of the head, and knit with a 1x1 elastic band a 6 cm high strip. Switch to the English elastic band (alternate the reverse loops with the front ones on the front and back sides of the product, when entering the front loop, insert the knitting needle into the loop the loop of the row located under the previous one) and knit a strip 6 cm high, then knit with a relief rubber 3 cm (alternate the reverse loops with the front loops from the inside of the product; knit the wrong loops on the front side, and when making faces enter the knitting loop not into the loop of the previous row, but into the loop of the row below the previous one).
Next 3 cm with an elastic band 1x1. Then go to hosiery knitting and make reductions in one row (knit 2 loops together with front loops), 3 rows of hosiery knitting, then still knit 2 loops together and another 1 seam row, and put the remaining loops on a thread and tighten tight.
Lapel according to this pattern
2 rows - pink thread, 2 rows - brown, 2 rows - pink.
Sew the finished lapel around the edge of the base of the cap and sew the cap on the back of the neck.
Crochet cap
Wide-lapel cap
Two-tone hat with a lapel and shirt-front
Hat Size: 54
You will need: yarn (100% wool) - 100 g of brown and orange colors, knitting needles №4.
Hollow Gum: 1st row - knit alternately 1 person. n., 1 out. n. 2-3 rows - * persons. p. knit according to the drawing, out. n. shoot *, repeat * - *.
Rubber 2x2: knit alternately 2 persons. subsection and 2 out. P.
Facial surface: persons. ranks - persons. hinges, out. ranks - out. loops.
On the knitting needles with a brown thread, type 124 p., Knit 3 rows with a hollow rubber band. Next, knit with a 2x2 elastic band and after 6 rows, overlap according to the pattern. Knit all faces 8 rows after the pattern. loops 2 p. together and knit with an elastic band 1x2 (* 1 faces. p., 2 p. * *) 8 rows. Then dial again for 1 person. p. and knit another 18 cm with a 2x2 elastic band. After that, knit all the loops 2 p. Together, pull the remaining loops on the out. side with the working thread and the same thread, make a seam.
Manishka
Type 80 sts on the knitting needles and knit 18 cm with a 2x2 elastic Next knit faces. smoothness, decreasing for the formation of a corner in each 2nd row on both sides 1 time x 5 p., 1 time x 4 p., 2 times x 3 p., 2 times x 2 p., then in each 4th row 15 times x 1 p. Close the remaining 6 p. Fold the elastic over the faces. side and hem. Crochet the edges 1 near st. non-slip and "crustacean step", performing 2 back buttonhole for back. Sew on the buttons.
Warm hat with a lapel
Lapel cap
The cap consists of two separately connected parts: lapel and head.
It will take approximately 200 g of fairly thick yarn, 2 knitting needles No. 4 for knitting a lapel and a set of 5 knitting needles No. 4 for the head.
Type 34 loops on 2 knitting needles and knit a straight cloth.
1st and 3rd rows - all loops are facial.
2nd and all even rows - 20 facial, 8 wrong, 6 facial.
5th row - 20 front, 4 loops to remove on an additional knitting needle at work, knit 4 next loops front, 4 loops from an additional knit knit, 6 front.
Repeat the pattern from the 1st row. Knit in this way 44 cm, connect the ends of the lapel with an invisible seam.
Knit the head on 5 knitting needles, start with the crown.
Collect 8 loops, distribute them into 4 knitting needles.
1st row - From each loop, knit 2 facial.
2nd row - purl loops.
Next, knit in stocking, knitting the front ones behind the back wall, making them seem twisted, and adding 8 loops in each of the next 9 rows, making sure that the added loops are located one above the other.
Knit the next 18 rows without adding.
Having finished the head, sew the lapel; its finished width is 9 cm.
Colored hat with a lapel
Scarf and hat
to complete the kit, 400 g of thick twisted yarn of light color is required. Knitting needles number 4,5.
Scarf. Type 25 loops on the knitting needles and knit 10-12 rows with a garter stitch. Next, knit a motif in the middle of the scarf according to the pattern, leaving 4 loops of garter knitting on both sides. When you have finished knitting the motif, continue to knit the scarf with a handkerchief to the middle of the scarf. Remove knitting from needles and transfer open loops to the auxiliary thread. In the same way, tie the other half of the scarf. Then sew open loops of both halves with a knit stitch. Decorate the finished scarf with tassels 11 -12 cm long. Smooth the knitted motifs along the edges of the scarf.
Beanie. Before knitting a hat, use a measuring tape to measure the width of the motif of the finished scarf and proceed from this value when calculating the number of loops for a set of the first row of the hat. The entire width of the cap consists of 4 motifs; if 4 motives are not equal in size to 48-50 cm in size, then when calculating, add 2 to 4 loops to each motive. Draw 78-86 stitches on the knitting needles (19 * 4 + 2 extreme or 21 * 4 + 2 lumpy) and knit a strip 7-8 cm high in this way: 2 front loops, 17 or 19 wrong stitches, etc., to the end of the row. Next, knit 4 rows with facial loops, then knit hats motifs according to the pattern starting from the 5th row, placing stripes of facial loops (hat ribs) above the facial loops of the initial rows.
Decrease for the bottom of the cap, start from the 17-19th row according to the scheme. Reduce by knitting 2 loops together on both sides of the ribs of the cap knitted with 2 facial loops. Finish knitting with 10 loops, remove from knitting needles, tighten open loops with a needle. Sew a hat on the side seam. Bend inward and sew a lapel-ruler from the inside of the cap.
www.klubochek.org "/\u003e
Lapel cap and scarf
You will need: 450 g of yarn (100% polyacryl; 190 m / 100 g;);
knitting needles number 3.5; hook number 3.5.
Volume hat
Size 56
You will need: 300 g of yarn “Magic-Super Excellence” (code 410) caramel color; knitting needles No. 2 and No. 3,5.
Weaving: 1x1 elastic; elastic with offset (the number of loops is a multiple of 4 + 3 p. for the symmetry of the pattern):
1st row - edge, * 2 front, 2 wrong *, from * to * repeat to the end of the row, 1 front, edge;
2nd row - edge, * 2 front, 2 wrong *, from * to * repeat to the end of the row, 1 front, edge. Repeat 1st and 2nd rows.
Spiral Pattern:
1st row - edge, * 1 wrong side, 6 facial, connected
long loops (insert the right knitting needle into the loop and, having made 2 turns of the thread, knit it with the front one) *, from * to "repeat to the end of the row, 1 wrong side, hem;
2nd row - hem, 1 front, * 3 long stitches knit on the auxiliary knitting needle at work, next 3 long stitches knit purl, 3 stitches from the knitting needle purl *, from * to * repeat to the end of the row, hem ;
3rd row - edge, * 1 wrong side, 6 front *, from * to * repeat to the end of the row, 1 knowingly, edge;
4th row - edge, * 1 front, 6 wrong, connected with long loops *, from * to * repeat to the end of the row, 1 front, edge;
5th row - hem, * 1 wrong side, remove 3 long stitches with a knitting needle before work, knit the next 3 long stitches with knitting needles, 3 stitches with a knitting needle knitting with knitting needles *, repeat from * to * to the end of the row, 1 purl, edging;
6th row - edge, * 1 front, 6 purl *, from * to * repeat to the end of the row, 1 front, edge. Repeat from 1st to 6th rows.
Hats
DESCRIPTION OF WORK. For a lapel on knitting needles No. 3,5, dial 31 p. And knit a strip with a spiral pattern with a length equal to the circumference of the head. Close all the loops. From the edge loops on the knitting needles No. 2, dial 83 p., Tie 8 cm with a 1x1 elastic band. Then go to the knitting needles No. 3,5 and knit with an elastic band with an offset of 15 cm. Then, in each front row, knit all the loops 2 p. Together. Pull the remaining 10-12 p. With working thread, with it, sew a seam.
SCARF
DESCRIPTION OF WORK. For knitting needles No. 3,5, dial 51 p. And knit with an elastic band with an offset. After tying 1.5m, close all the loops. At the ends of the scarf, make a fringe about 8 cm long.
Bound from 100 g mohair. Knitting needles number 4.
The lapel of the cap is connected with a raised elastic band, and the head with a 2X2 elastic band.
For the lapel, dial 16 plus 2 extreme loops and knit to the size of the head circumference plus 2 cm.
1st row: 1 front, 1 wrong side.
2nd row: between the front and back loops, pull out a new loop and, without removing it from the knitting needle, knit it with the front, 1 wrong side.
3rd row: knit the back loop of the previous row with the front loop, and knit the back loop of the previous row together with the wrong loop.
From the 4th row, repeat the pattern from the 2nd row and knit, alternating the 2nd and 3rd rows. The picture is turned inside out.
From the edge of the lapel, take 50 loops along the length and knit the head of the cap with a 2x2 rubber band, 16 cm high, then in a row, knit 2 loops together with the front and wrong loops, i.e., go to the 1x1 elastic band. Knit so 3 rows and close the loops. Sew a hat.
Well, that’s all I’ve found so far from hats with a lapel. In general, the Internet is not very rich in such models. So there is work to do.
In anticipation of winter frosts, every needlewoman thinks about how to warm her ears in the cold. It will be very simple if you buy a winter hat in a store or in a market.
There are plenty of good hats now, a lot of interesting options and models, interesting yarn, various colors, but the whole city will go to them. Therefore, it would be better to purchase woolen threads and present a model that will suit your face and suit the style of outerwear.
Today, knitted hats are very practical, fashionable and comfortable. Especially suitable for people with an active lifestyle. Knitting hats for women is now very popular and interesting occupation, as the result of his work is visible and delivers a lot of pleasant impressions. To create a unique item you will need diagrams and descriptions to models. It takes very little time to knit a hat; in this way you can please yourself and your family by linking each to a hat, or not one at a time.
Therefore, in our article you will find some options for hats connected with their handles. You can knit a hat in a couple of days. A winter hat knitted with knitting needles will be warm, elastic, well stretched, which will allow you to wear it for more than one season.
Knitting hats with a pompom, description and diagram
If you are a debutant in this skill, then you need to start knitting with a simple model. This hat is just suitable for beginner needlewomen. To get such a hat, you will need yarn from wool of a suitable color, middle knitting needles and a pompom, which can be purchased separately at the needlewoman shop. You can also do it yourself, we’ll talk about technology below.
Female knitting pattern winter hats see photo:
Fashionable winter hat with knitting needles ready, now do the pompom. Need to cook:
- cardboard,
- a needle with a thick eye,
- compasses and yarn, which tied a hat.
First you need to draw a circle with a compass, the same size as we want the pompom to be. Inside the resulting circle, draw another one and cut it out. So, you have a donut shape. Make two such blanks.
Next, put them together, take the thread and wind it on our stencil, while letting the yarn into the hole. When the hole is completely filled, cut the threads along the top of the donut, push the workpiece apart, fasten and fluff it. It remains to sew the accessory to the cap and you can wear it.
Tip: how to choose the right material for women's knitted hats.
It is best to use knitting needles No. 4, No. 4,5 and No. 5 with fishing line in a circle. And the choice of yarn usually depends on the model and style of the product. For a volumetric headdress, we select a thick, fluffy yarn. Elegant elegant hats look good from a thin uniform thread.
We knit a hat with braids. Season trend
You should not spend a lot of money on new items to emphasize your originality. Tie a hat with your own hands. In such an exclusive headdress, any woman will look stylish and elegant. The original hat can be knitted in a few evenings, even a beginner can master it. She will look good under a strictly cut coat, jacket sport style and even a classic fur coat.
Observing all the tips and the diagram provided, you will get a warm and comfortable hat.
Novelties of the season - knitted hats with a lapel
They will go to everyone in the literal sense of the word. The model is universal, it is combined with absolutely all types of clothes, the scheme is well selected, you will only have to decide on the color and yarn.
Knitting hats for women with a description
There are several options for knitting a winter hat with a lapel:
Youth style - lapel with pompom. A combination of yarn for knitting a product with this type of accessories is welcome, which can be both with threads and fur. 
A style for older people - braids and lapels. Suitable for sporty look clothes, and also will look great with a strict coat. Even if you successfully pick up a “braid”, you can combine it with a sheepskin coat. The light gamut with a wide oblique large knit looks very good.
Mohair caps with lapels - for ladies of Balzac age. They will be in harmony with a beautiful scarf to a long coat or sheepskin coat.
Such a simple female “Mood” hat fits simply and quickly, especially if you are familiar with the technique of knitting braids. This is the main pattern of the cap, but there is also a rubber band that made the lapel. The presence of a lapel, which is a fashionable detail this season, allows you to beautifully design your face frame and protects your ears from the wind. Such a cute hat can also be worn on loose hair, and put it inside, pulling deeper into the ears - a place for this is provided.
The circumference of the knitted hat should be 53 cm. The authors of the model preferred to take Essentials Merino DK yarn (50g / 120m), which is 100% pure merino wool, color No. 009, Burgundy, that is, a thick color of red Burgundy wine. You can choose any other, and the yarn will go to the cap 2 skeins.
Tools - 4 mm knitting needles, for elastic - 3 mm.
We will test the density with a braid pattern (see below) by tying a 10x10 cm square with the main knitting needles:
- on 27 loops (fr) we will execute 31 straight rows (pr), we are obliged to get a canvas the size of a given square.
Special designations used in the description of the pattern indicate the following.
С10В:
- 5 pt will be removed on the pop / cn (auxiliary knitting needle), holding the thread at work (ЗР);
- we knit 5 ltspt - facial pt; we knit 5 ltspt taking them from vsp / sp.
C6B:
- 3 pts will be removed on a / c SP; we knit 3 ltspt; we knit 3 ltspt taking them from vsp / sp.
We knit a playful hat with magnificent plaits knitting
Take thinner knitting needles, 3 mm thick, and pick 142 pt.
1st prd: * 2 ltspt; 2 ist - purl *; repeat * - * up to 2 pt in remainder; 2 ltspt.
2nd pr: * 2 ispt; 2 ltspt *; repeat * - * up to 2 pt in remainder; 2 expt.
We will repeat these 2 rows in the same sequence and we will knit a fabric 9 cm high. The last should be a row on the front side.
Sld.prr (wrong side):
- we knit only ott; along the way, add 3 pt scatter \u003d 145 pt.
The lapel is finished, we will change the knitting needles to thicker ones, 4 mm, and we will knit a braid pattern. We start the numbering of the rows anew.
1st prd: * 6 ispt; 10 ltspt *; repeat * - * up to 1 pt in the remainder; 1 ex.
2nd pr: 1 ltspt; * 10 ispt; 6 ltspt *; repeat * - * until the end of pr.
3rd pr: as the 1st.
4th pr: as the 2nd.
5th Ave: * 6 Izpt; С10В *; repeat * - * up to 1 pt in the remainder; 1 ex.
6th pr: as the 2nd.
Perform 4 more times the 1st and 2nd rows, we get the rows from the 7th to the 14th. All these 14 rows make up the vertical rapport (vrt / rp) of the pattern. Perform vrt / rp another 28 times, get the crown tops. Now you need to round it beautifully and finish at the top point.
Top caps
It consists of a rounding of the top, softly forming a beautiful top line.
1st pr apex:
- * we knit 2 ist together, clinging to the rear walls (ZS); 2 ispt; 2 knots knit together; 10 ltspt *;
- repeat * - * up to 1 pt in the remainder; 1 ISPT \u003d 127 pt.
2nd pr: 1 ltspt; * 10 ispt; 4 ltspt *; repeat * - * until the end of pr.
3rd prr: * we knit together 2 izpt for ZS; 2 izpt together; 10 ltspt *; repeat * - * up to 1 pt in the remainder; 1 ISPT \u003d 109 pt.
4th pr: 1 ltspt; * 10 ispt; 2 ltspt *; repeat * - * until the end of pr.
5th Ave: * 2 Izpt; С10В *; repeat * - * up to 1 pt in the remainder; 1 ex.
6th Ave: 1 ltspt; * 10 ispt; 2 ltspt *; repeat * - * until the end of pr.
7th Ave:
- * 2 ispt; 1 pt will be removed as a front; 1 ltspt; we’ll throw the shot on knitted; 6 ltspt; 2 drugs together *;
- repeat * - * up to 1 pt in the remainder; 1 ISPT \u003d 91 pt.
8th Ave: 1 ltspt; * 8 ispt; 2 ltspt *; repeat * - * until the end of pr.
9th Ave:
- * 2 ispt; 1 pt will be removed as a front; 1 ltspt; we’ll throw the shot on knitted; 4 ltspt; 2 drugs together *;
- repeat * - * up to 1 pt in the remainder; 1 ISPT \u003d 73 pt.
10th pr: 1 ltspt; * 6 ispt; 2 ltspt *; repeat * - * until the end of pr.
11th Ave: * 2 Izpt; C6B *; repeat * - * up to 1 pt in the remainder; 1 ex.
12th pr: 1 ltspt; * 6 ispt; 2 ltspt *; repeat * - * until the end of pr.
13th Ave: * 2 Izpt; 1 pt will be removed as an LCP; 1 ltspt; we’ll throw the shot on knitted; 2 ltspt; 2 drugs together *;
- repeat * - * up to 1 pt in the remainder; 1 ISPT \u003d 55 pt.
14th Ave: 1 ltspt; * 4 ispt; 2 ltspt *; repeat * - * until the end of pr.
15th Ave: * 2 Izpt; 1 pt will be removed as an LCP; 1 ltspt; we’ll throw the shot on knitted; 2 drugs together *;
- repeat * - * up to 1 pt in the remainder; 1 ISPT \u003d 37 pt.
16th Ave: 1 ltspt; * 2 ispt; 2 ltspt *; repeat * - * until the end of pr.
17th Ave: * 2 Ipt together; 2 drugs together *; repeat * - * up to 1 pt in the remainder; 1 ISPT \u003d 19 pt.
18th Ave: 1 ltspt; * 2 ispt; *; repeat * - * until the end of prr \u003d 10 pt.
This is all with knitting hats - we cut the thread, tighten the last 10 pt, sew the tail from the inside. We seam the web and thereby form a hat. We make a pompom from yarn, it should be large, 12 cm in diameter. It is attached at the top of the cap, at the junction of the last Fri.
In this article you will find a scheme for knitting a women's hat with knitting needles and a description of all the stages of work. The proposed product is both a convenient and stylish thing that every needlewoman can do quickly and easily.
Simple knitting methods
There are several ways to knit models of women's hats, which needlewomen can familiarize themselves with videoposted below. In them, experienced craftswomen represent the author’s models of women's hats, knitting, share experiences on yarn selection and competent calculation of loops and rows, explain the principles of knitting different models.
How can I associate a hat model with a lapel
It’s enough just to figure out how to knit a hat with knitting needles for women with a lapel, because you don’t need to knit any complex elements, and the main highlight of this model is to choose a bright color of yarn and make a lapel. But, despite the simplicity of execution, such a hat looks stylish and elegant.
For work, you will need about a hundred grams of turquoise yarn and about fifty grams of bright blue yarn, based on the fact that the head circumference is 56 - 58 cm, as well as knitting needles number seven and a set of stocking knitting needles. You need to start knitting a hat with an elastic element, for this you need to dial 31 loops with a turquoise thread and knit 42 cm with a garter stitch, i.e. alternate the front and back loops. Then sew open stitches to the stitching edge with a seam called “buttonhole”. Then you need to dial 44 loops on the stocking knitting needles on the left edge and knit two circular rows, reducing 11 loops. In the next row, the number of loops on the wrong side should be reduced to 22 loops. After that, you need to knit every second loop with the front loop, until there are only 11 loops that need to be pulled together with a working thread. Yarn of bright blue color is needed in order to make a pompom and sew it to the hat.
This model of a hat with a lapel can be made not only monophonic, but also multi-colored, this will require about a hundred grams of section dyeing yarn and knitting needles No. 7. First of all, you need to knit an elastic band, for this you need to dial 75 loops and knit rows until the product height is equal to 25 cm.Then you should knit rows, reducing the number of loops, and knit two wrong loops together four times in every fourth row. When there are only 15 stitches left, they must be pulled off and the occipital suture is processed.
How to knit hat patterns with a pattern
Fashionable women's hats with knitting needles with diagrams and a description of all the stages of work, for the manufacture of which can be found in this article, can be decorated with an original pattern or pattern.