Long, loose hair is beautiful, but not always practical, so long-haired fashionistas all over the world prefer to create different hairstyles in the form of buns that look stylish and elegant. The bunch came into fashion not so long ago and has already gained great popularity not only among fashionistas, but among stars. The uniqueness of such a styling is that it can be done almost daily, changing only a few details, and each time the beam will create a new image for its owner. In addition, a smooth beam is elegant, practical and suitable for any occasion, whether it be a morning run or a social party.
How to make a beautiful bun of hair?
A small bundle with a scythe
1. First, collect the hair in a ponytail, leave one strand under the braid and secure the hair with the most tight elastic or a special hair clip.
2. Then the hair must be wrapped around the base, securing with hairpins.
3. From the remaining strand, braid the pigtail and tie a rubber band around the tip.
4. Wrap the oblique finished bundle and secure with a hairpin. An ordinary braid can be replaced with an unusual weave, for example a slanting fish tail.
If the hair does not have enough volume, then they can be twisted a little with tongs or combed. On short or thin hair, you can increase the volume of the bundle with the help of a gum sponge, which is worn on the ponytail, after which the gum is wrapped with hair.
Large braid with French braid technique
1. Make a high tail. Select a thin strand from the tail and wrap the tail around it, securing the tip with invisibility.
3. Now again separate a small strand from the tail, divide it into 3 parts and start weaving a three-strand braid, however, always lock the side strands from the center under and not above it.
After a couple of stitches, grab a new strand from the wide part of the tail. And so with each stitch add a new strand of loose hair in the ponytail. It turns out weaving using the French braid technique on the contrary.
4. Make sure that you keep the same length of strands caught in a braid. Thus, you gradually weave a round blank for the beam.
5. When the hair in the tail ends, continue to weave the usual pigtail out of the hair remaining after weaving. Secure with an elastic band.
6. Spread the braided bundle around the base of the tail. Hide the tip of the braid underneath. Lock your hair with invisibility.
A beautiful bunch with a scythe is ready!
In the assortment of stores there are special rollers that greatly simplify the life of lovers of the beam. Thanks to such a thing, the hairstyle is neat and does not take much time.
A variety of hairstyles in the style of "bunches" can be used to form everyday and holiday images.
Hairstyle “rose” from hair: how to weave step by step 
Refined and very romantic hairstyle "rose" from the hair only at first glance it may seem complicated. In fact, it is based on simple braids in three strands. Look at the “Rose” hairstyle from the hair in the photos presented on this page:
Instructions are offered on how to weave a “rose” out of hair with your own hands. A step-by-step photo of the “rose” from the hair is offered, which will help to understand the whole process:
1. Make a sagittal parting from ear to ear through the highest point of the head. Tie a tight tail from the hair of the back of the head.
2. Divide the tail into three equal parts, each of which is braided in simple braid of three strands.
3. Pull the edges of each braid, but only on one side.
4. Start spreading the rose from the first braid: fold it with a loop and fasten it with studs at the base of the tail.
5. Lay out the second braid under the first, fasten with studs. The third braid - under the second, also secure with studs.
6. Stitch the tails of the pigtails with invisibility.
7. Braid the reverse French pigtail from the strands of the parietal and temporal-lateral zones: pick up the strands on both sides, connect to the main ones and bring under the central one.
8. Tighten the braid, hide the end under a rose and stab it with invisibility.
9. In the same way, braid the reverse French braid on the other side and secure the end under the rose with the help of invisibility. 
How to make a “bun” hairstyle from braids according to the photo 
Such a classic hairstyle "bun" of braids is incredibly good on long and thick hair. Discreet, elegant, but very sophisticated and comfortable. The following describes how to make a “bundle” of braids and give it elegance.
Look at the “braid” from the braid in the photo, which illustrates the process:
1. Make a vertical zigzag parting.
2. Braid the hair on one side into a reverse French braid. To do this, grab additional strands on the sides and put them together with the main ones under the central one. Fix the end of the braid with a small silicone rubber.
3. Similarly, braid the reverse French braid on the other side.
4. Wrap one braid with a loop and secure with studs.
5. Wrap the second braid around the first and also secure with hairpins. Hide the end inward. 
How to make a bun hairstyle step by step
The following are several styling options in a similar style. The presented "hairstyle" hairstyle allows you to understand the algorithm of actions step by step. You can learn how to make a "bunch" step by step, according to the proposed instructions
"Air Bunches" 
"Air bundles" is a very stylish option for using braids in a hairstyle. And although you have to work a little while creating it, the result will undoubtedly please.
1. Make a sagittal parting, temporarily clip the hair of the frontoparietal zone with a clip. On the dividing line of the upper and lower occipital zones stab invisibility.
2. Divide the hair into four equal parts. Braid from them simple braids of three strands, secure with small rubber bands. Pull the strands around the edges for more volume.
3. With one hand, hold the pigtail by the tail, with the other pull it up to the base and fasten it with a hairpin where the invisibility is stabbed. This will ensure reliable fixation of the beam.
4. In the same way, fix the remaining tufts of braids. Hide their ends inside the hairstyle and fix with invisible.
5. Braid from the hair of the frontoparietal zone two reverse French braids in the direction from the center to the ear, fix the ends with small elastic bands. Extend the edges slightly to add volume to the braids. Leave free locks on your face.
6. Secure the braids with studs above the bundles.
7. Wind the strands of the face in the direction from the face with an iron or curling iron and randomly pop the hairpins to the braids. 
Double weave 
Double weaving - simple and very original hairstyle, which will help create the image of a fairy-tale heroine.
1. Separate hair with sagittal and vertical parting. Tail on the back of the head.
2. Braid from the hair of the parietal and temporal-lateral zones the reverse French braids from the central parting along the contour line of the forehead, picking up additional locks only from the outside.
3. Divide the tail into three strands and braid a simple braid, secure the end with an elastic band. Pull the edges of the braid slightly to give more volume.
4. Twist the braid into a bundle, fix it with studs.
5. Wrap small braids around the bundle, secure them with hairpins. 
"Openwork flower"
This hairstyle is based on weaving a fishtail. “Openwork flower” is a very elegant and at the same time simple version.
1. Divide hair into two equal parts with a vertical parting. Select the part of the hair at the forehead line and divide it into two small strands.
2. Take a small part of the hair just below the right strand, connect it to part of the right strand and transfer to the left.
3. Similarly, grab part of the hair on the left, connect it to part of the left strand and transfer to the right.
4. Continue weaving in this way to the lower occipital region. Braid the remaining free hair into a fishtail braid and secure with an elastic band. To make the braid more voluminous and openwork, stretch its edges along the entire length.
5. Similarly, braid the braid on the other side.
6. Fold the braid in a circle and lay on the back of the head, fasten with studs.
7. Do the same with the other scythe. Hide the ends under the hairstyle with the help of invisibility.
8. Fix a hairdress with a varnish. 
A universal and stylish bundle of braids should be able to make every girl. This skill will repeatedly help you out and help you to have a flawless look in any situation, this styling will be especially relevant in the conditions of impending heat. Hairstyle a bundle of braids will harmoniously fit both in the image of a business lady and in a gentle romantic look, she has no age restrictions: teenage girls can perform it in school, and older young women will be able to admire their colleagues at work. We will learn how to make a bundle of braids on our own, by analyzing a few simple schemes.
Create a bunch of pigtails with your own hands
Now we will tell you in detail how to make a bundle with a scythe to ourselves. All the schemes presented by us are very simple, you just have to try!
What do you need to create a bundle of braids?
To make a beam with a scythe yourself you will need:
- several invisibles;
- hairpins, matched to the color of your strands;
- donut pad
- thin elastic bands;
- hair fixation spray.
Some dexterous girls manage to create similar styling on a short hair length, but the optimal length of the strands to create a similar hairstyle is up to the shoulder line.
Romantic asymmetric knot
- Start weaving a french braid from the right temple.
- Weaving is performed diagonally, that is, the end of the braid should lie on the left shoulder.
- Try to take large strands, then the styling will turn out to be more voluminous, do not tighten the braid too much.
- Tie its end with a thin rubber band.
- Starting from the ends of the hair, twist the pigtail into a knot and fasten it with invisibility just below the left ear.
Asymmetric scythe with a scythe is ready! The process did not take more than 5 minutes, such a hairstyle should not be underestimated, it will be a quick way to put yourself in order in the morning and run to work or study in all its glory.
Youth high braid bundle
Another quick scheme to play on your own hair is as if created for young and active girls. Such a hairstyle a bundle of braids will be an excellent addition to the image of a resident of a metropolis. Step by step instructions following:
- Collect the strands in a ponytail on the top of the head. Try to tie the elastic as high as possible.
- Divide the tail into 2 equal parts and braid from each of them the usual.
- Tie the ends of the braids with thin elastic bands.
- Pull the curls of braids to make them more voluminous.
- Wrap one pigtail around the base of the tail, and then another.
- Secure them with studs. Fix the result with varnish.
- Complement your hair with a cute bow.
A few knocked out strands will make this bundle with a scythe sloppy and more natural.
Elegant fishtail in a bundle
This installation option is a little more complicated, but nevertheless, its execution will not take you more than 10 minutes. The basis of hairstyles. A bunch with a scythe as in the presented photo can safely claim the title of best evening styling. It can be an option. Executing it yourself is quite simple:
- This hairstyle suggests volume at the roots. If you have straight, smooth strands, first twist them with a curling iron.
- Gather all the curls on one side and braid the side of the fishtail braid.
- Alternately, starting from the base of the “tail” and descending to the ends, pull the curls to make the weaving voluminous.
- Tie the tip of the fishtail with an elastic band.
- Starting from the tip, wrap the pigtail in a bob and secure with a few studs.
- Fix the result with varnish.
A fish-tail skewer is ready. You can surprise others and conquer men's hearts!
Hook with weaving “Easy
Another pattern of incredibly simple weaving. It will take you a couple of minutes to turn a boring braid of 3 strands into a spectacular looking styling. A step-by-step diagram looks like this:
- Start weaving a French braid almost at the very neck, making only 2-3 grabs on each side.
- The remaining loose hair just braid into a braid of 3 strands.
- Tie the tip with an elastic band.
- Fold the pigtail starting at the tip so that it forms a glomerulus.
- This glomerulus must be firmly fixed with invisibles, shifting a little to the side.
Such a braid from a braid looks very stylish, doesn’t it ?!
Knotting the pigtails into knots
An unusual way to weave two ordinary braids of 3 strands together can give a spectacular result. Such a braid from a braid can be performed on different hair lengths, the longer the strands, the more knots need to be made. Step-by-step instruction for you:
- Braid 2 of the simplest braids of 3 curls.
- Tie the ends of the braids with elastic bands.
- Take 2 braids in different hands and tie them into a simple knot.
- Repeat this step several times to the very ends of the braids.
- Fix the obtained braid plexus with studs on the back of the head.
The styling is ready! If you have thin hair middle length You can pull the curls of the braids a little to make them more magnificent before tying them into knots. Then the beam will turn out to be more voluminous.
Cute bun with scythe around
Our proposed bundle with a scythe around can be performed even on not the most long hair. Thanks to a little trick, namely a donut pad, styling will look luxurious. Make this hairstyle by wearing a light summer sundress, or perform it for a special occasion in a duet with an evening dress - you will always be irresistible. Repeat step by step the scheme described by us:
- Comb your hair and divide it along the side part.
- We divide the entire hair into 3 parts: separate it from the face and put aside a small part of the hair. Gather the lower curls in the back in the tail and tie them with an elastic band. The rest of the hair on the crown will be woven into a braid.
- Start weaving a French braid from the forehead, going down to the ear, braid the free ends of the hair into a simple braid of 3 strands.
- Put a donut on the base of the tail.
- Wrap the curls around the donut pad, and fasten their ends under the pad with pins.
- Now the braid is wrapped around the beam: first bring the end of the pigtail under the beam, and then around it. The tip of the pigtail is hiding under a bait.
- Wrap strands near the face with a curling iron and lay it beautifully. If the curls are longer than in the photo, you can pin them with invisibility under the scythe.
- A bunch with a scythe around is ready. Do not forget to fix the hairstyle with hairspray.
We hope our lessons will help you become even more beautiful and inspire you to new experiments. Good luck to you!