How to make a paper chess board with chess. Master class with a detailed description

Berdnik Galina Stanislavovna, primary school teacher of KEI KhMAO-Yugra "Laryak boarding school for students with disabilities".
Description: Chess is not only a game that gives children a lot of joy and pleasure, but also an effective, effective means of their mental development. The process of teaching the basics of a chess game contributes to the development in children of the ability to navigate on a plane, the development of analytical and synthetic activities, thinking, judgments, conclusions, teaches the child to remember, compare, generalize, anticipate the results of his activities and Practice has shown that a well-organized process of teaching chess gives a lot and gifted children, and conditionally ordinary, and weak, and children with various functional disorders. Therefore, it is desirable to start learning the wise game as early as possible, but, of course, at a level accessible to the child.
The master class provides a detailed description of the manufacture of a paper chess game and paper chess pieces using a magnet.
Purpose: ready-made demonstration material is necessary in the lesson when studying any topic of the subject of chess.
Target: Production of demonstration material on the subject of chess.
Tasks:
1. Repeat the concept of "figures on a plane". Develop design abilities.
2. Development of children's ability to visual modeling.
3. Cultivate the desire to make the product with your own hands.
4. Cultivate the habit of working independently, carefully, bringing the work begun to its logical conclusion.
5. Develop compositional skills and aesthetic sense.

Materials and tools:
1. Paper for drawing A-4 or drawing paper.
2. Colored paper, corrugated cardboard.
3. Ruler (50cm), pencil, scissors, cutter.
4. Magnets, adhesive tape, glue.

Description of the manufacture of visual aids
"Chess and the chess board".
1. To make a chessboard, prepare 2 sheets of A-3 drawing paper. The standard sheet size is 42 cm by 29.7 cm.
The photo shows half of the chessboard. For easy storage of the manual, prepare two such parts. They were glued from the wrong side with a strip of wide adhesive tape.
Also, you can make a chessboard from a single piece of whatman paper. After marking in pencil on the base of the squares, prepare figures from black or gray paper. Make sure that the black square matches the markings on the white sheet of paper.

The color of the chessboard is not fundamentally important. You can combine yellow and brown or yellow and green.
2. A thick white strip of paper was glued to each half of the chessboard. We will place letters and numbers on it to determine the location of the chess pieces.

3. You can print on a printer, you can write beautifully with a felt-tip pen or marker on a white strip of a chessboard.

4. Placed and carefully glued, in the appropriate place, numbers and letters.

5. For greater aesthetics, the chess fields were bordered with a thin strip of corrugated cardboard.

Here, closer you can see the corner of the chess half.

In the same sequence, we make the second half of the chessboard. We connect the halves from the wrong side with tape.
Now, you can fix it on a metal board with magnets.

6. Let's start making chess pieces.
Pre-print on the printer pieces used in chess.
Chess pieces templates:

Figures can be of different colors and shapes, for example:

We liked the streamlined shape of gray-yellow shades more.
Glue the printed thin sheet of paper onto thick cardboard.
It is advisable to "laminate" each figure with a wide adhesive tape. This will give strength and longevity in the use of didactic material.
Important advice! If you decide to use adhesive tape, then first you need to glue it directly onto the figure, and only then cut it out. So, the outline of the figures will turn out to be smooth and durable, and the details themselves will look neat.

7. Glue a piece of magnet on the wrong side of each figure. You can use Moment glue.

8. Our pieces are ready to take the initial position of the chess game.

Closer view of the chess troops.

We use this demo material in every lesson.

You can name moves, rearrange pieces, solve any logical problems. Explain and find ways to solve winning moves.
Thank you all for your attention! I will be glad the usefulness of the material provided.

Chess is one of the most mysterious and greatest games of all time. Shrouded in ancient mystery, black and white figurines continue to excite the minds of a huge number of people around the planet. The favorite occupation of sultans, kings, shahs, emirs and other powerful people of this world has not lost its relevance in our days.

great game

Chess helps to learn to think logically, carefully, to calculate one's actions and deeds many steps ahead. There are various variations of the materials for the figurines and the board: they could be made of gold and other precious metals, black, mahogany or ebony, ivory, crystal, inlaid or decorated with precious stones, mother of pearl and gems. In the same way, many versions are known: in the form of fighting armies belonging to a particular historical era, in the form of famous people, various animals, characters from favorite films, etc.

However, the chess order remains the same - 32 pieces (16 white / light and 16 black / dark) on the field with a corresponding 64-square cell layout.

It is not at all necessary to save up for golden chess, because today they can be made from literally anything. If you know how to carve wood, then it is quite easy to carve wooden figures with your own hands. It is even easier to cut them out of plywood or glue them from thick paper using a stencil.

Special craftsmen make chess sets from the insides of a computer (a motherboard for a board and chips in the form of figures), from electronic vacuum tubes, from plastic, glass, on LEDs or neomagnets, etc. Turn on your imagination - and go ahead.

How to make chess with your own hands: manufacturing options

One of the most popular homemade chess technology options is sawing them out of plywood.

• Take the sketches of the figures, a ruler, a pencil, a rail, plywood and carbon paper. You will need to transfer the images to plywood first. To do this, place carbon paper under the sketch and carefully circle all the figures in full with a pencil.

• The next step is to cut out the flat figures that you have drawn with a jigsaw. The holes will also have to be cut out, having previously marked them: their thickness must correspond to the thickness of the plywood, and in length they must match the length of another product. The hole can be made with a drill or an awl. At the joints, it is better to leave a margin of 1 mm so that the figures sit tighter.

• You should get 32 ​​figures and stands with holes - in the same amount, and another 30 round blanks for future checkers. All of them will need to be sanded with sandpaper.

• Next, start assembling. Attach the figurines to the stands using glue.
• Then separate half of the elements and paint them with black acrylic paint. Leave them for a while for the paint to dry.

• A chessboard can be made from a piece of plywood (4 mm thick will do). You will also need rails. Cut out two blanks (400 * 200), and make frames from the rails - in the same quantity and in the same dimensions. Glue plywood blanks to them, and place hinges between the halves so that the board opens and closes well. Using a stencil, put numbers, letters on the surface of the board, make a “cell” marking. And inside the board you can draw markings for playing backgammon. Paint the sides with red acrylic paint.

For figures, take plywood, 3 mm thick. Make sure that there are no cracks or knots on it. Apply the varnish in two layers so that the color at the output is more presentable.

In order for chess to be voluminous, more skills and abilities will be needed, since wood carving is indispensable here. For the light side, you can pick up the following species: boxwood, birch, ash, maple, hornbeam, and for the dark side, walnut, ebony, apple and others are well suited. If it is not possible, then it is easier to make all the figures from linden, for example, and then burn or varnish.

Using the "Dutch" thread, you can do without a lathe. To do this, you will need square bars of various sizes: blanks for future figures:

• cut out stencils of chess from cardboard and transfer them to the edges of the blanks (for the horse you will need two views - from the side and from the front);

• to get the profile of the leg of the figure, drill it by holding the workpiece in a vice (for different figures you will need drills of different sizes);

• cut out the figures along the marked lines using a jigsaw (follow the profile of adjacent faces and leave bridges on them);

• carefully cutting out all the figures, remove excess wood and file the surface (you can sand it with a sandpaper);

• finished chess must be soaked in hot drying oil and coated with the appropriate varnish (black figures will first need to be tinted with stain). To make them stand better on the board, you can glue pieces of felt, plush or thin suede on the legs.

With desire and imagination, chess is easy to make from paper using the origami technique, and from wine peels or bottle caps, and even molded from plasticine.

Some nuances

A chess set can be very large: such pieces are considered outdoor or garden. That is, they can be placed as an element of landscape design to play a party or two in the fresh air. There are also mini-sets that are easy to take with you on the road or travel.

But the most common size of figurines is considered to be the classical measure: the king has a height of about 7-10 cm, and other figures decrease in size, depending on what rank they are. Consider the height of the base when working.

As you can see, making chess with your own hands is quite simple. It doesn’t matter what material or theme you choose for your set, the main thing is that it will be created with love and soul, which means that the “royal game” will reveal its innermost secrets to you a little…

The oldest game, which is about 1500 years old, has not lost its popularity in our time. Both adults and children love chess. Invented in India, the game quickly spread to almost all over the world. She fell in love with the fact that it requires the adoption of a logical solution to tasks, has a moment of competition, and many variations. Sports competitions of champions attract the attention of the world community.

Variety of chess

Over time, people began to fantasize and make chess with their own hands from different materials. Traditional figures are replaced by a wide variety of heroes. These are the characters of popular films and cartoons, famous athletes and politicians, animals and geometric shapes. The size also varies from the minimum that can be seen through a magnifying glass to a giant king of 4.5 meters. There are desktop, road, huge park, gift.

The materials from which this popular game is made are also amazing in their diversity. Starting from paper and cardboard figures to golden ones, decorated with precious stones. Modern craftsmen and designers compete in creative approaches to this process. Chess can be glass, wood, plastic, clay, bone.

Their craftsmen make from computer parts, bolts, car engine parts and other waste material. Do-it-yourself chess is made by adults and children, professional designers and workers at the enterprise. Joiners and wood carvers make unique works of art. Jewelers prepare gift sets for high-ranking persons.

DIY chess from polymer clay

One of the most popular materials for making various crafts in our time has become polymer clay. The material is bright, strong and durable. The child will especially like the game if the pieces are not ordinary traditional chess, but heroes of their favorite cartoons or fairy tales. How to make chess with your own hands from polymer clay? You can buy a set in a children's art store.

Before sculpting, the clay must be carefully crushed. The longer you knead, the softer the material becomes. A figurine of any character is molded, at the request of the baby himself. To cut small parts, you will need a stationery sharp knife. When the figure is ready, proceed to the most important moment. To make the clay strong and hard, it must be baked in the oven. For firing, a temperature of 130 degrees is required.

It is better to put the figures on ceramic tiles, in extreme cases, you can put parchment for baking on a metal baking sheet. It is desirable for dense products to fill the core with another material, for example, crumpled foil. Then the clay has a thinner layer and bakes better. Bake an average of 20 minutes. More details are indicated in the instructions for use.

paper figurines

Even a child can make chess with his own hands from paper. Here, too, many manufacturing methods are presented. These are origami, cardboard figures according to schemes, quilling, glued paper, on a solid stand. Consider how to quickly make paper figures like a tabletop theater.

White cardboard and, for example, red are taken. Fold in half so that the fold is on top of the pattern. With a simple pencil, a silhouette of a chess piece is drawn. At the bottom there is an extra square for the base on which the object will stand. A picture is cut out along the contour with sharp scissors and its two parts are glued together. The squares of the base are bent in different directions and glued onto a solid base for strength. Everything, the figure is ready. The rest are made under the stencil.

Figures from strips of paper

Now it is very popular to make crafts using the quilling technique. Art stores sell sets of thin strips and hooks, from which you can make different pictures. So do-it-yourself chess is easy to twist from strips of paper. To do this, you need PVA glue, quilling strips in two different colors and a holder. Pawns are easy to make. Wind tightly around the hook in layers of strip and glue the edge to the rest. It turns out a tight twisted cylinder, similar to a checker.

The rest of the figures are made based on the imagination of the master. An elephant or an officer is made in the same way as a pawn, only at the end the hook is pulled out along with the paper neatly upwards, a cone shape is obtained. You can attach hands to the queen and glue a head, twisted separately, to the top of the cone. For the tour, you can twist several circles of different sizes and glue them so that a turret forms. The most difficult element will be the manufacture of a horse figurine. On the cone described earlier, they put on a triangle made on a stencil ruler for quilling. The mane is glued on the back side of the leg, cutting the tape with scissors like a fringe.

Wooden models

Beginning amateurs, professional carpenters, and skilled carvers like to make chess with their own hands from wood. The traditions of each country can be seen in the figurines and the design of the board. Here are the heroes from Russian fairy tales, Ukrainian Cossacks, Indians with spears, Norwegian Vikings. The masters pay special attention to the design of the board. It can be a table with a drawer for figures, a ship, veneering from different types of wood or a typesetting canvas made from carved squares of different types of wood.

How to make chess with your own hands from wood, the master decides based on his skills and imagination. A novice amateur for a summer cottage can use a thick branch of a tree by making stumps of various sizes with simple patterns cut out. To do this, you need a sharp knife or chisel. If you have a jigsaw or electric saw, you can cut columns of different heights from a bar by making small cuts on the sides of the main figures.

Having made chess with their own hands from wood, professional carvers put them up for competitions and win prizes. The price of some works of art reaches several thousand dollars. Not only the quality of the work performed is valued, but also the transmission of the traditions and history of the people, the originality of the performance.

We develop the creative abilities of children

Children from an early age love to invent, fantasize, play. Making chess together with the children, parents and teachers develop not only the creativity in children, but also practical skills and abilities. Working with paper, wood or clay, kids get unforgettable emotions. And if there is work together with adults, then children gain valuable experience in communication and work skills. The pleasure of playing such homemade chess cannot be compared with anything.

Learn to fantasize, work with your hands and think through games with your head. The all-round development of your children is guaranteed!

Good afternoon, dear readers of the blog, pump your brain. As promised, the continuation of the selection of unusual chess sets.

1. DIY chess

There are many people on our planet who know how to work with their hands. So one of their representatives made chess for himself. And he made them from the insides of his computer.

Under the board, of course, the motherboard was used, and the figures are made of chips of various types. The chips were selected in two colors - black and green, although some still had to be tinted. The whole structure was installed on bolts screwed into the holes at the corners of the board.

Pawns are made of capacitors. Rooks from transformers. The remaining figures are made of several elements each of motors, parts of a hard disk, coils, batteries.

But this version, according to the creator, is not yet the final version. If he manages to collect enough chips he will make a board with an adjustable size.

"Eat a piece" is a fairly common expression in the amateur environment, although opponents will not gnaw each other's pieces. But in the PI.K.DA chessboard project by the Argentinean designer, you can “eat” a piece not only figuratively, but also literally put it in your mouth and drink tea.

The author of the project decided that since the game of chess often drags on for a long time, it makes sense to combine the game with the opportunity to eat. But since all the players are different and their tastes are different, it was decided to shift the choice of snacks on the shoulders of the players themselves. As a result of this decision, all the pieces on this chessboard were made in the form of baking molds. So everyone can bake their own figures to taste or cut them out of sausage, ham, cheese, vegetables or fruits. And exchange armies with the enemy.

And the chessboard itself is made in the form of a tray on which you can put saucers for molds successfully eaten during the game and napkins.

Seafood dishes are very common in Thailand. In the form of seafood, the Cambodian/Thai Chess Set chess pieces are made.

In all the sets I have previously described, the main changes concerned the chess pieces. But the creator of this set decided to change exactly the board and created three-dimensional chess. The only thing that is a little alarming in these chess is the practical convenience of playing them.

In order to be able to play them without making a large number of mistakes, you need to sit over the chess in order to see the entire field. When playing, you need to be extremely careful when moving the pieces, because it is very easy to knock down one, or even several at once.

5 Sex Shop Chess

This chess is suitable for those who believe that the intellect is sexy, and the brain is the most important erogenous zone. Just because the Vibrator Chess Set is a chess set whose figures are made in the form of sexual toys. New York designers received a very unusual order. A high-end erotic goods store asked me to create erotic chess. And here's what they got.

Each piece of this chess set is a sex toy, a vibrator. A variety of different forms allows any girl to find a figure to her liking,

This set costs not even a little - 7000 US dollars.

Here is another original chess set, in which the figures are made of electronic vacuum tubes with a luminous part corresponding to its value. When the lamp is in one of the sockets, it burns, if it is pulled out, it goes out.

Chess pieces are often made in the form of various objects, historical characters or fairy-tale creatures. I present to you another option, but already close to our real life: businessmen against officials.

Here you can find many representatives: an oligarch, a judge and a president, representatives of our valiant army and personal bodyguards, a tax inspector is able to eat any manager. There is even a horse with a memorable nickname Dollar.

These chess are for night gatherings. For a boring night train ride when the lights are out and the passengers are asleep. Designers slightly changed the color of the figures, now they are not the usual black and white colors, but blue, green and red. Each chess piece glows with its own LED, and an adapter and sockets are included for portability.

And of course, there were holes inherent in the knuckles, which at the same time tell the players how the piece moves.

This chess is built on the principle of a toy in which you need to insert the figures into the slots on the playing field. Chess pieces are just plastic cards with familiar images.

Their main plus is that you can play in any weather and under any circumstances. If necessary, the playing field can be turned over, all the pieces will remain in their places.

This chess is especially good in nature

Chess made of wood, what could be better than playing on a beautiful wooden chess board. Chess can be made from wood with your own hands. Today we will talk about how to make wooden chess with your own hands, so that someone can get more satisfaction from this wonderful game. There are many options for how to make a chessboard yourself with interesting figures. Handmade chessboards are expensive, of course, everything determines the quality of work and ability.

How to make chess from wood?

Making a chessboard with your own hands can be a good business, especially for those people who know how to handle wood. The demand for such products will always be high, especially if you list lacquered chessboards on Ebay, you can charge a very good price for them.
First you need to decide what shape the chess pieces will be, then how to make them. The easiest way to cut chess pieces from pine, but, of course, it will turn out more expensive if you work with oak. Then you should consider the design of the board.
Watch the video for more details on how to make a chessboard, cut out figures and get the finished product. It can be given as a gift, it will be the best gift for people who love to play chess.

chess making video

Making chess from wood, we think over the design

Making a chessboard video

We continue ...

Finishing the production of a chessboard



We draw a pattern on a chessboard