Science

DIY for Valentine's Day. Interesting ideas: how to decorate your home for Valentine's Day. We are organizing a surprise at home “Flowers in Hearts”

It is believed that this holiday was named in honor of one of the two martyrs - Valentinus of Interamnes and Valentinus of Rome.

On this day, people give their loved ones flowers, sweets, cards (Valentines) with poems and declarations of love, as well as many other gifts symbolizing love.

But a gift made with your own hands will make no less an impression than a purchased gift.

Here are some DIY Valentine's Day gifts you can make:

DIY poppers with candies and confetti for Valentine's Day

You will need:

Paper towel or toilet paper cylinders

Wrapping

Confetti

Scissors

Candy or other small gifts.

1. Cut the cardboard cylinder in half.

2. Fill each half with candy and confetti.

3. Fold the halves back and secure them together with tape.

4. Cut a sheet of wrapping paper, wrap it around the connected halves of the cylinders and secure with tape.

5. Tie two lengths of ribbon to both ends of the cylinder. You can use scissors to curl ribbons.

To get the contents, you need to break the craft in the center (where the halves of the cylinders are connected).

DIY vase with hearts and roses for Valentine's Day (master class)

You will need:

Jar

Strong thread

Red felt

Glue and tape .


1. Cut out small hearts from felt.

2. Thread a needle and thread through the hearts. Leave about 5-7 cm between the hearts.


3. Tie a knot on one side and the other side of the thread.


4. Secure one end of the thread to the jar with glue or tape and begin wrapping the thread with hearts around the jar.

The vase is ready, all that remains is to pour water into it and place the flowers.

DIY Valentine's Day (photo): bouquet of pompoms

You will need:

Scissors

Green felt

Twine

Multi-colored threads

White acrylic or spray paint

Hot glue.


Making a pompom

1. Wrap the thread around your fingers 50 to 75 times. For a large pompom you need to wrap it around 4 fingers, and for a small one around 2. Cut the thread.

2. Cut another piece of thread 15-20 cm long and wrap it around the lump that you wrapped around your fingers. Tie a knot.

3. Carefully remove the thread from your fingers and use scissors to cut the loops on the right and left.

4. Make the pompom more voluminous by adjusting the threads. It is also worth trimming the thread a little with scissors to make the pompom more even.

Preparing the flower stems and connecting the parts

1. Take twigs and paint them White color. Let the paint dry.

2. Using hot glue, attach the pom pom to the branch.

3. Cut out leaves of any shape from green felt and glue them to the branches.

4. Make several flowers to make a bouquet.

5. Wrap the bouquet of flowers with ribbon and twine. You can add a note of congratulations to the bouquet.

DIY crafts for Valentine's Day: puzzle cube with hearts


You will need:

4 wooden cubes

Acrylic paints and brushes

PVA glue

Sequins different colors

Heart template

Pencil.

1. Place 4 cubes on a flat surface as shown in the image.

2. Place a heart template on the cubes and trace it with a simple pencil.

3. Start applying PVA glue to the cubes with a brush, namely to the places marked with a pencil.

4. Carefully sprinkle glitter of the same color onto the glue. Use a brush to remove excess. To ensure that the glitter lies tightly, you can apply a layer of glue on top. Let the glue dry.

5. Rotate the cubes and repeat steps 1-4 to make another heart, only this time use a different color of glitter.

6. Cover all sides of the cubes with heart pieces.

You can put all the cubes in a fabric bag, which can also be decorated with a heart.


DIY Valentine's Day gifts: 52 reasons why I love you.



You will need:

Deck of cards (36 or 52 pieces)

Binding rings

Colored cardboard

Double-sided tape

Hole puncher

Pen.

1. Punch two holes in each card using a hole punch.

2. Stack all the cards and thread the binding rings through the holes.

3. Cut out several small rectangles from cardboard, the size of one should not exceed the size of the card.

4. Using double-sided tape, glue the rectangles onto the cards.

5. On each rectangle, write one reason why you love your significant other. You can write something with humor for a change.

DIY gift for a guy on February 14th: a painting of kisses

You will need:

White cardboard

Scissors

Frame for a picture or photograph

1. Cut a piece of cardboard slightly larger than your frame.

2. Apply a few “kisses” to the white cardstock.

3. Insert the cardstock into the frame and write on back side personal message.

DIY gift for February 14th: heart made from cones


You'll need:

Red thick paper (in this example, 7 sheets measuring 30x30 cm are used)

Scissors

Hot glue or PVA glue

Strong thread.

1. From red paper, cut out several (in this example, 14 pieces) squares measuring 7x7 cm - for the inner part of the heart, and 10x10 cm (in this example, 47 pieces) for the outer part.

2. Cut out a heart from cardboard. In this example, the widest part of the heart is 40 cm.

3. Make cones out of all the squares.

4. Start gluing the cones to the cardboard heart. Large cones on the outside and small ones on the inside.




Here's another option:


Gifts for Valentine's Day: heart embroidered on an envelope or card

You will need:

Colored thread for knitting

Thick paper envelope or colored cardboard

Needle (large enough for thread)

Pencil

Rubber

Scissors.

1. Draw a heart on cardboard or an envelope.

2. Using a needle, make several holes along the line of the drawn heart.


3. Start threading the thread through the holes. different directions. Tie a knot at the end.


DIY gift ideas for February 14th: hearts with confetti and an arrow


You will need:

Tracing paper

Colored cardboard (white, red, pink)

Confetti (you can buy ready-made or cut from colored paper)

Black marker

Red thread

PVA glue or hot glue

Scissors.


1. Make a heart template. Draw a heart on cardboard and cut it out. To make it symmetrical, you can fold the cardboard in half and draw half a heart and cut it out, then straighten the paper.


2. Place the heart template on tracing paper and trace in two places to cut out two identical hearts.


3. Make the arrow feathers.

3.1. Fold the red cardstock in half and draw half of the feathers for the arrow (see image) and cut them along the line with scissors.

3.2. Straighten the paper feathers and cut them along the fold line. On each half, stepping back from the edge by 0.25 cm, make a fold.

Repeat with the pink cardstock so you end up with 4 pieces for the arrow.

4. Make the point of the arrow.

4.1. Using scissors, cut about 6 cm from the skewer.

4.2. Cut two identical triangles from red and pink cardstock.

4.3. Glue the triangles to each other so that they cover the tip of the skewer.

5. Collect the heart.

5.1. Using a black marker on one of the tracing paper hearts, write something nice for your other half.

5.2. Secure both hearts together with red thread and a needle. Leave some space to fill the inside with confetti.

6. Fill the heart with confetti.

You will need:

Colored cardboard

Scissors

Stationery knife

Ruler

PVA glue

Paper clips

Corrugated paper

Stamps (if desired)

Decorations to taste.

1. Cut a strip of colored cardboard. Its size is 28x4 cm.

2. Fold the strip in half.

3. Bend the ends of the strip towards each other so that the outer sides of the ends touch.

4. Glue the touching ends of the paper tape together and secure them with two paper clips.

5. Cut out a square from cardboard that is larger than the size of the paper heart.

6. Apply a little glue to the edges of the heart and glue it to the square.

7. Using scissors, cut a square along the outline of the paper heart. You have a small box.

8. Put a piece corrugated paper onto the box and cut out a heart a little larger than a cardboard paper heart. Use scissors to cut the fringe.

9. Pour sweets or notes into the box, apply a little glue to its edges and glue a corrugated paper heart. You can stick another heart made of corrugated paper on top (for strength).

10. Decorate the box with braid, hearts, feathers, etc. You can add the inscription "Don't break my heart."

How to make a gift for February 14: a heart made of pompoms


You will need:

Ready-made pom-poms or red knitting thread to make them

Scissors

Pillow

Thread and needle

Fabric glue (if necessary).

In this example, 22 pom poms were used. The size of the pillow is 40 x 40 cm. The size of the resulting heart is 20 x 20 cm. One pompom has a diameter of 5 cm.

Valentine's Day is approaching, the celebration of which invariably takes place in a romantic atmosphere. The most effective way to create it is to decorate your own home with cute decor that symbolizes the strong feelings of lovers. We share simple but effective decor ideas for the most sensual holiday of the year.

  1. Personal book of love

It is not difficult to make such decor. You will need ribbons, white and red paper, and several hardcover books. Wrap them in red paper and glue hearts with inscriptions onto the binding. All that remains is to stack the books and tie them with ribbon.

It is advisable to choose books whose themes correspond to the holiday. For example, suitable romance novels. After all, your partner may have a desire to leaf through the book.

A more complex option is to make personalized love books. Take several photo albums, in each of which leave the required number of pages. The rest can be carefully cut off. Fill photo albums with pictures of them together and other mementos, such as letters.

  1. Tree on which words of love grow

To make this decor you will need several oddly shaped branches and colored paper. Place the branch in a vase and hang paper hearts with themed messages on it. For example, you can write declarations of love or best qualities a loved one who delights. If desired, the branch can be coated with white, pink or red paint from an aerosol can.

  1. Unusual contrast card

It is impossible to imagine Valentine's Day without the exchange of “Valentines”. A handmade card will show the strength of feelings much better than one purchased in a store. Fold a sheet of thick paper in half. Outline the outline of the heart and draw stripes on it. Fill in the outlines of the stripes with black paint and the hearts with small red buttons glued with acrylic or silicone glue.

  1. A picture is worth a thousand words

Surely there are a lot of different buttons stored in the house that have no worthy use. They can be used to create a romantic picture. Using thread or chalk, mark a contour on the fabric according to the size of the selected frame. Try several options for placing buttons inside the outline and choose the one you like best. All that remains is to sew the buttons to the fabric and trim it so that it is slightly larger than the frame. This is necessary to securely fix our painting in the frame.

  1. Romantic garland of countless hearts

Even a child can make such a garland, and it looks more than impressive. Fold thin strips of multi-colored paper in half and bend in the middle. Fasten the free edges of the strips with a stapler or simply glue them together. The first heart is ready. Then thread a couple more strips through it and repeat the procedure described. All you have to do is be patient and assemble the garland of the required length.

Another option is to make a large heart consisting of several small ones. Glue the edges of narrow strips of paper folded together. The two stripes in the middle remain free. The free edges of the remaining strips are glued to this middle on both sides.

  1. Love with coffee aroma

Ordinary candles in red and white colors are a good, but a little boring decor option for Valentine's Day. We suggest you diversify it - make your own candlestick that will exude a pleasant coffee aroma. Simply fill a short glass container with coffee beans and place a flat candle in it.

  1. Souvenirs for friends from the heart

The basis for making such decor, which can be used as a souvenir for friends or to decorate your home, is hearts made of multi-colored cardboard. In order for the threads to be held in the desired position in the picture, it is necessary to cut its edges in a zigzag shape. Tie the first turn of the thread on the base heart. Use the free long edge to wrap the heart in a circle. In this case, the thread connects the opposite cutouts along the edges of the card.

  1. Garland of pleasant memories

Most photographs, no matter how important they are, are reviewed extremely rarely. So why not make Valentine's Day an occasion to cherish the moments spent with your loved one? Secure the printed photos with a decorative clothespin on a long ribbon and decorate with hearts cut out of paper. If you can’t find clothespins, glue the pictures with any universal glue.

  1. DIY love elixir

Ordinary Coca-Cola in glass bottles, decorated with your own hands, turns into a love elixir. Remove labels from bottles and thoroughly remove any remaining paper. Then degrease the glass by wiping it with alcohol - this is necessary so that the paint is securely fixed to the surface. Acrylic or stained glass paints are suitable for covering glass.

  1. Cupid's arrows that you can't escape from

The basis for Cupid's arrows, which can be given to loved ones or used for interior decoration, are wooden barbecue sticks or cocktail straws. The tip and feathers for the arrow are cut out of dense fabric, for example, felt. Identical parts are glued together on the “shaft”, thereby being fixed to it.

  1. Love message on bottles

Wine bottles can help convey a message to your loved one. Carefully clean them of labels, degrease the surface with alcohol and cover with acrylic paint. Special paints for glass, which are sold in craft stores, are also suitable. When the painted surface is dry, draw the desired letters on it. The decorative composition will be complemented by branches of artificial plants placed in bottles.

  1. A heart you want to eat

Decor from fruits or vegetables – original way decorate festive table, Any oblong red or pink fruit will do. For example, tomatoes are “cream”. Cut several vegetables in half diagonally and secure the different halves with a decorated toothpick. Appetizing hearts are ready.

  1. A heart filled to the brim with love

What will it take to make a decor that symbolizes a heart filled to the brim with love? Jars with screw caps, acrylic paint gold color, bright ribbons, multi-colored beads. To ensure that the paint adheres well to the glass surface, do not forget to clean it and degrease it with alcohol. Instead of beads, you can use any bright little things.

  1. Decor that will please those with a sweet tooth

Decor for the holiday table can be made in a matter of moments. Simply fill glass vases or tall glasses with colorful candies.

  1. Cozy panel in country style

As a basis for the panel, you can use cardboard or a small board covered with fabric. The heart itself is made from short colored sticks. Draw the outline of a heart on the fabric and glue the sticks onto it using acrylic glue. Then you can start filling the outline. Three or four layers of sticks glued on top of each other are enough to create an exclusive home decor.

  1. Simple but effective decoration for a festive dinner

Paper and scissors are all you need for a cute decoration that will decorate your holiday table. Fold the paper several times, draw a heart on it and cut it out. The more hearts there are on the table, the more elegant it will look.

  1. Symbol of love using quilling technique

A heart made from many pieces of paper rolled into a tube can be used as a hanging or table decoration. Cut out a heart from thick cardboard. Glue thick paper tubes along its edges in a vertical position. For structural reliability, they can also be glued together. Now you need to fill the heart with other paper tubes, but loosely twisted. We recommend making them in different sizes - this way the composition will look more impressive. Additionally, the heart can be decorated with ribbons or lace.

  1. A love game that never gets boring

As the classic said, “our whole life is a game.” That means love too. This attitude towards the most wonderful feeling can be expressed by decorating the interior with a decorative garland. Heart cards are its constituent elements. Using a hole punch, holes are made in them, through which a thin red ribbon is threaded. Additionally, the garland can be decorated with narrow strips of fabric tied to a base ribbon.

  1. Sparkling wreath of hearts

The basis for the manufacture of such hanging decor are metal containers from “pill” candles. They are easy to bend into a heart shape. Then the elements of the garland are glued together using silicone or acrylic glue. All that remains is to decorate the wreath with ribbons and hang it on the wall or door.

  1. Newspaper panel with good news

Replace a framed picture or photo with a newspaper page. The inscription can be applied to it using a stencil with letters or drawn by hand.

  1. Strawberry hearts in champagne

Hearts cut from strawberries will look especially impressive on low champagne glasses. We recommend choosing medium-ripe berries, otherwise the edible decoration will not be firmly fixed on the glass.

  1. Bright garland of voluminous hearts

A festive garland of paper hearts is an interior decor for Valentine's Day that will definitely not go unnoticed. Cut out hearts of the same size from multi-colored paper. Then place the two hearts together and stitch down the middle. Make a hole in the top, and then bend the halves of the hearts. All that remains is to thread the ribbons through the holes and tie them to the base.

  1. A heart pieced together

A puzzle is a thing that quickly gets boring and is used quite rarely, but you don’t dare throw it away. But you can give the old puzzle new life. Just glue its parts together in the shape of a heart and decorate the resulting wreath with ribbons.

  1. Romantic panel using string art technique

The basis for the decorative panel for Valentine's Day is a painted square board into which nails are driven along the drawn outline of the heart. A thread is tied to one of the nails, which then clings to the others in a chaotic manner. By the end of working on the panel, the thread should wrap around each nail. The greater the distance between adjacent nails, the more thread layers the panel should have.

  1. Unusual wreath made of wood

If you have a thick branch and a jigsaw at your disposal, then you should try to make an original wreath from wooden saw cuts. To make this decor look elegant, we recommend making the cuts thin. Cut out a heart outline 8-10 cm wide from cardboard and glue the first layer of cuts onto it. Then glue the second one so that the wooden cuts cover the gaps between the elements of the first layer. To keep the texture of natural wood visible, paint it in light colors.

If the idea of ​​sawing wood seems too complicated, then use hand-painted paper hearts instead of saw cuts.

  1. Burning hearts in sparkling candlesticks

To make a candlestick symbolizing a burning heart, you will need glass jars, newspaper or music paper, and decorative twine. To give the paper an aged look, you can moisten it with strong coffee or tea. After drying, the desired shapes are cut out of the paper and glued to a jar tied with decorative twine. In a similar way, using carved paper napkins, you can make other candlesticks.

Wrap hearts a couple of centimeters wide, cut out of cardboard, with thick thread. Tie the remaining free edge into a loop. Such hearts are used as independent hanging decor or elements for a garland.

  1. A laconic panel with a textured paper heart

A cardboard box with voluminous sides was used as a frame for the panel. If one is not found, then you can glue thin wooden beams along the perimeter of the cardboard base. The heart, the central element of the decorative composition, is made of paper, the edges of which are cut. To make the panel look three-dimensional, several identical hearts, bent in the middle, are glued onto a cardboard base.

  1. For wine lovers

Preparing materials for such a decorative panel can take a lot of time - after all, you need to collect a couple of dozen wine corks. The corks are then glued to a thick wooden or cardboard base using construction adhesive. Carefully paint the corks in colors ranging from pale pink to dark fuchsia, creating a gradient effect. The panel can be supplemented with a thematic inscription.

Time flies quickly, before we even have time to blink an eye, one holiday will give way to another, and so on. It would seem that we just celebrated the New Year, and Valentine’s Day has already arrived. Well, in order to fully experience the taste of the upcoming holiday, you just need to start preparing for it in advance, then throughout the entire preparatory period you will feel a unique, and most importantly, positive pre-holiday atmosphere. Today we want to show you how to decorate an apartment, a house, or just a separate room for February 14th, it all depends on where the romantic evening will take place, and how much your soul requires the scope of the celebration.

1. Paper balls.

Very simple in terms of the material used and the decor used. You can’t tell by the finished appearance of the fluffy balls, they look really festive. They can decorate literally the whole house, the main thing is that there is an opportunity to hang them somewhere, a chandelier, wall sconces, and window cornice will do. You can also drive nails into two opposite walls closer to the ceiling, stretch the fishing line and hang such balls along its entire length.

How to make balls from napkins.

We place five or six napkins one on top of the other, fold them into an accordion, and tie them in the center with thread. We begin to lift each layer of napkins to the top on each side, the result is a fluffy napkin flower-ball.


2. How to decorate your apartment for Valentine's Day with balloons.

How can such a romantic holiday be complete without balloons? Ideally, it is better to fill the balloons with helium, then they will effectively float near the ceiling surface. You can attach a valentine with an exclusive declaration of love to the strings of each balloon. In addition, you can form a large heart from the balls.

How to make a 3D heart out of balloons.

Cut out a heart from thick cardboard and use a utility knife to cut out the core. You're cheating Balloons, it is necessary that they be of different sizes. Tie the balls tightly together to the cardboard blank, and so on until the result begins to satisfy you. You can study the process of creating such a heart in the photo below.


3. Decor with garlands.

Garlands will help you complete your idea, and these do not have to be electric garlands; they can be made of paper, wire or fabric. So many various examples Such garlands are presented in. If you still want to use electric garlands, you can stick them on the window with tape, forming a heart at the same time.

How to decorate an electric garland with hearts.

From printer paper or regular newspaper, cut out hearts identical to each other, create a slot in the center of each heart the size of a garland light bulb, thread a heart onto each light bulb, turn on the garland and admire the result.




4. How to decorate a room for Valentine's Day - wall decor.

The walls can be decorated with various thematic panels, garlands or flowers. Flowers can be cut from a tube of paper towels; to do this, bend the tube slightly in the center, cut it with scissors into rings 8 mm wide, you get petals, lay out flowers from these petals on the table and glue them into a composition. The finished composition can be hung on a nail driven into the wall.


How to make a panel from twigs.

Attach a thick sheet of paper or light wallpaper to a wooden frame, cut out a heart from the paper, cut dry twigs according to its outlines, paint them gold. Then paint the background, stick a heart made of twigs in the center, and hang the finished panel on the wall.

Panel of hearts.

Attach paper to a wooden frame, or white wallpaper. Then take a clean thick sheet of paper and create a rainbow effect with strokes of paint, cut out identical hearts from this paper, bend each of them in the center, and glue them to the wallpaper attached to the frame. Hang the finished panel on the wall.


5. A tree in honor of love.

To celebrate love, you can make a tree-shaped decoration for your home for Valentine's Day. To do this, you need to select a dry branch with branches, place it in a vase, and tie hearts or rosebuds made of paper to its branches (at the end of the article it is shown how to make these).

6. Decor with Chinese lantern balls.

Chinese lanterns red or pink colors will add a special flavor to the decorated room; they can be mounted on a chandelier above a festive table or on a curtain rod.


7. Decor with rose petals.

Rose petals look very romantic; you can use both natural and artificial ones for home decor. Rose petals can be used to lay out a heart on the bed, they can be scattered on the floor as a path to the festive table, and they can also be used to decorate the table by simply scattering them on the surface of the tabletop. By the way, rose petals can be made from corrugated paper; at the end of the article we show how to make a rose from this material.



8. Soft toys.

Soft toys hugging hearts will also greatly emphasize the festive atmosphere; they can be placed on shelves, lined up on a windowsill, or placed one of them on the holiday table. In addition, you can put together a whole bouquet of small bears; for this, teddy bears need to be strung into steps, and wrapped in beautiful wrapping paper, tied with a bow. Such a bouquet will not only decorate the room, but will also serve as an excellent gift for your other half. Such a gift can only be supplemented with a cute exclusive one.


9. Festive wreath in the shape of a heart.

A festive wreath in the shape of a heart will fit perfectly into the overall interior design, and besides, it is absolutely not difficult to make. Cut out a heart-ring from thick cardboard and glue it on top Christmas decorations in the form of hearts, paper or fabric hearts. A voluminous heart on a ribbon of paper flowers also looks very beautiful. To make it, you need to cut out a heart from cardboard, glue a ribbon to it, and cover the entire front side with paper flowers; you can see how to make such flowers at the end of the article.


10. Candles.

A romantic setting cannot be complete without candles; candles can be placed on the table in the shape of a heart or you can purchase candles covered with hearts. You can see beautiful examples of such candles in the photo below.

How to make a candlestick from an apple.

Cut off the cap of a green apple, use a knife to carefully cut a hole the size of a tablet candle, insert a candle into the resulting hole, light it, and admire the interesting improvised candlestick.




11. Figurines.

If your home has figurines themed to the occasion, for example angels, dancing couples, etc., then immediately take them out and display them in the decorated room.


12. Topiary.

A beautiful topiary will help decorate the room you are decorating; to create it, you need to purchase a foam ball, which is secured to a wooden stick installed in a flower pot with stones. Then the ball must be covered with paper flowers; you can find out how to make such flowers at the end of the article.



13. Decor with fresh flowers.

What could be better than the aroma of fresh flowers, so don’t skimp and buy a couple of bouquets of lavender, roses or orchids, and put them in vases filled with water. Vases can be placed on wall shelves or a festive table.



14. Decoration of the festive table.

Decorate the table with candles, flower arrangements, a snow-white lace tablecloth, place valentines here and there, strew the surface of the table with rose petals, place a candle in an elegant candlestick and a tiny vase with a rose next to each plate, don’t forget about themed red napkins, and floating balloons above the table .



Table setting.

The color of the tableware can be white, red, gold or pink. Combined tableware in white and red looks the most advantageous. If you decide to place snow-white plates, then a scarlet textile napkin with a fork and knife tied with a red ribbon with a heart will look great on top of them. You can also put a small gift box with jewelry, and next to it put two scrolls made of sheets of A4 paper, with warm words printed on them. You can study it in the photo below best examples table settings for February 14th.



15. Paper flowers.

Well, how to decorate a room for Valentine's Day without using different variations of paper flowers?! No way! Without them, the room will seem empty and unfinished, especially since they are often used to decorate other items (wreaths, garlands, topiaries, etc.).

Spiral bud of a rose.

We draw a spiral on a sheet of paper, cut it out with scissors, then take a toothpick and wind the cut spiral from the outer end (not the inner, but the outer end), remove the winding from the toothpick, and the bud immediately takes on the desired shape.


Pay attention to the photo below; to make a rose you will need leaves of different shapes. We cut them out of corrugated paper, use a toothpick to bend the outer upper edges, form a bud, and gradually glue the remaining petals to it, with the edges bent.

Small chrysanthemum flowers.

We take one multi-layer napkin, fold it in half, then in half again, secure it in the center with a stapler, cut out a circle, and lift each layer of the napkin to the top and center.



Corrugated paper rose.

We cut a sheet of corrugated paper into small rectangles, wrap each rectangle on top of a pencil, and move it towards the center, creating a gathered effect. We form a rosebud from the finished segments, for this we take the first segment, twist it into a spiral, attach the next one to it, and draw it around the first one, do the same with the next ones, at the end, we tie the bud from below with threads.


Printed 3D rose.

We print on a printer or transfer four roses from the template below. We paint over them with a red pencil so that the painting is uniform, take a piece of paper, crumple it and rub it over the surface of each of the roses. Next, we cut out the buds, leave the first one in its original form, cut off a couple of outer petals from the second, a few more outer petals from the third, and leave the central bud completely small. We glue double-sided foam tape to each of the buds; it is thicker. We place the rosebuds one on top of the other, create a couple of turns of wire, a little larger than the resulting rose, and place the rose in this wire ring. This craft can be used to decorate a holiday table.



Today we told and also clearly demonstrated how to decorate a house for Valentine’s Day, the main rule is to use more red and pink tones, and also liberally use hearts made from all kinds of materials in the decoration of the room; decorating with flowers is also welcome, and not only natural ones , but also artificial. We are sure that with such preparation, the question of how to decorate your apartment for February 14 will no longer bother you, and the holiday will go well.

They are extremely popular, because this material is both very common and cheap. Hurry up and check out our original ideas holiday crafts!

3D Valentine

Of course, you can’t do this holiday without a postcard that will accompany the gift. We invite you to pay attention to the photo collage below - isn't it an unusually original 3D Valentine? And it is done very quickly and easily - in just 20 minutes!
Print the proposed template on colored paper of the color you need. Make cuts (and only on the bold lines). Make folds and bend the leaf. Try slowly bending the sheet (it is not at all necessary to attach the workpiece with tape to the table, this was done only for the convenience of photographing). Fold the Valentine card completely and iron it.

To make the card thicker, you will need to glue a piece of paper to the back, then fold it in half.

And, of course, don’t forget about a spectacular gift. You can place a 3D Valentine in an envelope and sprinkle a small amount of confetti in it - the presentation will turn out to be quite original.

Wall decoration

Wine corks are a rather unusual material, but with its help you can make a panel for all lovers. Just look at the photo below and you will immediately understand what exactly needs to be done.
First, decide what kind of colors the future heart-panel will be decorated with, and depending on the number of shades, divide the wine corks into “piles”. Apply the desired shade to the top of the corks using a sponge or sponge. Wait for the plugs to dry.

Prepare the base for the panel - go over the board with fine-grain sandpaper and varnish with matte acrylic varnish. Once dry, apply vinyl stickers - this can be a phrase or a name. Well, now all that remains is to “plant” the corks on the hot glue, arranging them in the shape of a heart.

Here's another interesting idea! The hearts (the process of making them is described using the photographs below) turn out voluminous and very cute.

Sew it and your other half will surely like this fragrant gift.

Bead crafts for Valentine's Day

An excellent gift for Valentine's Day will be a beaded “craft” - a tree in the shape of a heart. It is noteworthy that beads of two different shades will be used for the branches of the tree, which symbolizes the masculine and feminine principles. Making such a tree is quite easy; even a beginner, looking at the step-by-step photographs below, can quickly complete such a handmade masterpiece.

First of all, the thin wire needs to be cut into small pieces, “tie” 7 beaded loops on each piece, keeping in mind that the loops should be located at the same distance. Then twist the section so that the result is a twig. For a lush tree you will need to make 25 branches of one color and 25 of another.

Twist small branches into large ones (for one large one there should be 5 small ones). The base of the element must be wrapped with floss thread, which will match the shade of the beads. You will probably need some advice that will allow you to avoid unsightly knots: bend the tip of the floss down at the very beginning of the winding, and, pressing it with your finger, begin to wrap, while also grabbing the tip of the thread. At the very end, simply clamp the thread between the wires.

Form halves of the tree from the resulting elements. Take a wire that is thicker in diameter and screw 5 branches of the same color to it. Wrap the threads around the floss and bend it to get the desired shape (we remind you that at the end of the work the bead tree should have a stylized heart shape). Proceed in a similar way with the second half of the tree. Connect the lower parts of the stems and twist them.

A wide variety of objects can be used as a stand; the most common option is a pot into which the barrel is inserted and some kind of fixing solution is poured. The pot can be decorated, for example, with sequins.

DIY Valentine's Day Crafts

Of course, we couldn’t ignore making gift boxes.

The carrot box is extremely original and exclusive; in order to make it, you will need orange cardboard, as well as green felt for the tops. Among the step-by-step photographs of production below you can find a template for cutting and gluing the “root vegetable”, and all the secrets of making such a cardboard miracle will be revealed to you.
Felt craft for Valentine's Day looks extremely attractive - in essence it is a heart-shaped box. The photo collage below shows all the stages of transforming this soft fabric into an excellent “craft”!

Valentine's Day Crafts for Kids

Children also really want to take part in the holiday, because some of them have long-established sympathies. Why shouldn't a boy give a Valentine's card to a classmate who is so much fun to play with? Why not give a girl a stunning braided hairstyle on this day?

Friendship Bracelet

This bauble, woven from threads, will be a wonderful children's craft for Valentine's Day. Using the photographs below as a guide, explain to your child exactly how to weave the floss threads to make a bracelet. But not simple - you see on it an image of red hearts on a blue background.

Holiday hairstyle

On the eve of the holiday, be sure to learn how to braid such a hairstyle and your daughter will thank you, because this style will be very reminiscent of princess hairstyles, and the braids that are woven in the shape of a heart will add zest. Photos of such “crafts” for Valentine’s Day are posted below.

Of course, you can use other materials to make holiday crafts, for example, very popular ones can be called dough crafts for Valentine's Day. Create, fantasize and surprise your other half with your handicraft talents!

Handmade gifts for Valentine's Day are very touching. These are not only postcards, hearts, but also vases, a “love potion”, a hare, a bear.

How to make a beautiful card for Valentine's Day?

Of course, you can buy it in a store and give it to your significant other. But it’s much more interesting to make it yourself. To make such a custom postcard, take:

  • sheet of cardboard;
  • store-bought colored paper printed on a printer;
  • ribbon;
  • glue stick.


Fold the white cardboard in half, if it is not double-sided, then first take two sheets and glue them together with the wrong sides. Cut squares from colored paper or beautiful printed backgrounds, fold them in half, cut out hearts, you will need 3 pieces.

Lubricate the back side of the first heart with glue in the vertical center and attach it to the card. Glue a second one on top of this heart in the same way, and a third one on top of it.


They should be glued only in the center so that the edges of each heart remain free. Raise them a little, adding volume to this figure. All you have to do is glue a ribbon to the bottom of the card and you can give it to your loved one.


Here's how to make a postcard so that it looks like a stitched one. To do this, take:
  • a sheet of white paper;
  • color or printed;
  • golden braid;
  • felt-tip pen or marker;
  • hole puncher;
  • glue.
Fold the sheet in half and write a Valentine's Day greeting inside. On the outer part in the center you need to glue a heart cut out of colored or printed paper. Now use a marker or felt-tip pen to draw dotted lines around the heart.


Punch small round holes along the contour of the card with a hole punch and thread lacing through them.


Here's how to make a postcard using almost the same principle. You also need to cut out a heart, but in the amount of 3 pieces, glue them onto thick cardboard or a white sheet of paper folded in half, then outline with strokes that look like a basting stitch.


Tie a ribbon around your handicraft masterpiece and you can give it to the person for whom this memento was created.


See how you can make a card in a different way. Looking at this, your loved one will know how wonderful you feel about him.


Fold an A4 sheet of paper in half, make a white frame on all sides, gluing a rectangle of colored paper printed on a printer to the center. Cut strips of equal width from white paper. Decorate them on both sides with cut out corners.


Glue these blanks horizontally onto the postcard, placing them parallel to each other. You will need 7 pieces. Write the days of the week on them.


Another heartwarming Valentine's Day gift you can make yourself. To do this you need to take:
  • paper;
  • glue;
  • red colored paper;
  • scissors;
  • rhinestones.
Apply heart-shaped glue to the center of the card.

If you cannot draw the heart exactly, then first trace its outline with a simple pencil, pressing lightly.


Now, without delay, you need to pour rhinestones onto the adhesive base. If you don’t have such a decorative element, finely chop tinsel or colored paper and make sprinkles out of them. Cut out 4 strips from red paper, glue two on one corner and the same on the opposite corner.

How to sew a gift for Valentine's Day with your own hands?


You will quickly create similar bunnies from leftover matter. To make them, take:
  • pieces of canvas;
  • red felt;
  • padding polyester;
  • some colored pink paper;
  • black marker;
  • glue;
  • scissors;
  • White list.
Take a piece of paper and fold it in half. Draw a blank like this.


Turn it inside out, lay it on the fabric, cut along the contour. But for now it’s better not to cut the gap between the hare’s ears.

First, sew these two parts on the wrong side along the edges and at the bottom, then turn them inside out and only then cut out a triangular gap between the hare’s ears.


Now you need to fill this semi-finished product with padding polyester. Sew it around the edge with a beautiful loop stitch.


See how to make arms and legs for this gift. They are the same shape. For each limb you will need to cut out 2 identical parts. Sew them together on the wrong side in pairs, matching them right sides together. Fill with padding polyester and sew the remaining hole on your hands.

Now for the leg you need to sew the workpiece on top on both sides to make two fingers; on the handle we separate one using one seam.


To make a ponytail, cut out a circle, sew it with a basting along the edge, tighten it slightly, and stuff it with padding polyester.


As you can see, next, you need to tighten the thread to make a round tail. Without cutting it, sew this part to the bunny.

Cut out two identical heart blanks from red fabric, sew them together on your hands, stuff them with padding polyester, leaving a small hole free. Through it, you turn the heart right side out and now sew up this hole.


Cut out two circles from white paper or thick fabric of the same color. Using a pen, marker or felt-tip pen, draw pupils on them. Cut out a small triangle from pink paper to become the nose of this animal. You need to glue these parts in place.


Using a pen or marker, draw a bunny's mouth and mustache, and use a glue gun to attach arms and legs to it.


You can sew a gift not only in the form of this funny animal, but also using the image of a bear.


Such a mini-toy will certainly delight the person to whom you present it for Valentine's Day. Sew a small bag, put a bear and a chocolate in it. To make it, take:
  • suitable fabric or linen napkins;
  • thread and needle;
  • scissors;
  • filler.

Sew the bears using kitchen napkins. The animals will be soft, have a nice color and will cost you very little.



Draw a bear template on a piece of paper. As you can see, its width is 6.5 cm and its length is 9 cm. To make several bears at once, fold the napkin and cut them out according to the template provided.


Cut out a heart from scraps of pink napkin and attach it to the bear using blue threads.


Embroider the eyes with black thread. That they were on the same level, it is better to draw them with a pencil first. Match two blanks of one bear with the right sides on the outside, sew them with blue threads along the edge.


Stuff the bear with padding polyester through the top hole and sew it to the end. Make a small triangular nose from a pink napkin and glue it onto the animal’s face. Make a bow from a satin ribbon. Sew the bear on the neck of a boy, and near the ear of a girl.


Such a gift on Valentine's Day will be very economical, since you can sew 7 bears from one napkin. That is, from a package containing 6 napkins, you will create 42 animals. If you decide to celebrate your child’s birthday using , then make such souvenirs with your own hands and give them to all guests. The rest can be given as a Valentine's Day gift to those you care about.

DIY gift from glass jars

They will also be a wonderful gift on this unforgettable day. As they say, cheap and cheerful. But first, the jars need to be washed well with dishwashing detergent so that they are streak-free and look like new. You will also need:

  • colored paper and/or printed tags;
  • glue;
  • scissors;
  • ribbons;
  • jar lids.
Let's make this love potion. In fact, one jar will contain pomegranate juice, the other two will contain candy. Glue love messages on the jars. Cut out hearts from pink paper and stick them on the cork in the jar or on the lid. Tie the top of the container with a ribbon. Fill some containers with candy, pour juice into others. Close the lid and then you can give these mysterious gifts.


You can also make the next present from jars. To implement a creative idea you need to take:
  • small glass jars (preferably baby food);
  • paper napkins;
  • decoupage glue or PVA;
  • clear nail polish;
  • brush.
Wash the jars thoroughly in warm water and remove the labels. Dry these containers and lubricate them with PVA. Use napkins with hearts or other images that correspond to the day. If they are multi-layered, use only the top layer for decoupage; the bottom layer is not needed. Glue these blanks onto a jar greased with PVA.


Go over the top with a brush, dipping it into clear varnish. But this can only be done when the glue has dried. If you use PVA, you will have to wait at least 2 hours; decoupage glue dries within 15 minutes. Decorate glass jars with satin ribbons; you can put fresh or artificial flowers inside.


You can make a vase using a different principle. For this you will need:
  • glass jars;
  • paints;
  • tassels;
  • jute rope;
  • red felt;
  • tree branches;
  • scissors;
  • glue.
If you don’t have ready-made pink paint, then add a little red to the white and mix. You will get the color you want. Using a brush, apply this solution to the outer surface of the jar. When it's dry, go over the paint again. After the second layer has dried, you can make a third one.


When the paint has dried, tie the neck of the jar with jute rope, cut out two hearts from red felt, and glue them to the end of these laces. Place a flower in a vase, after which you can give it as a gift or decorate a room with such an item on Valentine's Day.


If you have an unnecessary vase, use it for the next craft; if you don’t have one, then take a glass jar. Any of these items must be coated with white acrylic paint.


Make 2-3 such layers. When they are all dry, place the twigs in this container and glue pink hearts cut out of colored paper onto them.

Hearts in gifts for Valentine's Day

They have long become a symbol of love. You can make cards using this form or other interesting gifts.

For the following use:

  • a small box;
  • red felt;
  • glue;
  • paper;
  • candies.
If the inside of the box is not very pretty, cover it with paper or cloth. Cut a strip 20 mm wide from a white sheet and fold it like an accordion. Glue the lower tip of this blank to the center of the box, and glue a heart to the upper edge of this accordion.


As planned, when you open the lid of the box, the heart should bounce evenly on the paper spring. To do this, place tinsel or special paper inside the container, as in the photo, so that the heart rises evenly and not crookedly. Place shiny candies on top.


The work is completed, but the topic is not finished yet. You can find out further what gift to give to Valentine on Valentine's Day or to a loved one with a different name. This gift will also be shaped like a heart, but it will have wings.

Take:

  • a sheet of white paper;
  • red felt;
  • two buttons;
  • wire;
  • needle and light thread;
  • colored rope;
  • pliers.
Fold the paper in half to cut out 2 wings at once. Cut out two heart pieces from felt and white paper and glue one on top of the other. Using a hole punch, make a hole on the right and left in the resulting workpiece. Thread a piece of wire into each button, twist these pieces on the back side, and trim off the excess.

Thread these pieces of wire into the holes in the heart, also attach them to the wing on the back side, and secure them with wire.


On the reverse side, pierce the wing together with part of the heart with a needle with a white thread threaded through it. Fix both wings with it, but so that they move.


Attach a wooden stick to the underside and secure it with tape.


Pass a colored rope through the threads you passed along the back side. Tie her in their center. Bandage the stick with it too. You will hold the toy by it, pull the thread, and the wings will begin to flutter.


You can give this type of gift for Valentine's Day or choose any of the above. If you want to see with your own eyes that they are very easy to make, then watch the fascinating videos.